Handling a Unexpected Hot Water System Shutdown: Essential Steps
Handling a Unexpected Hot Water System Shutdown: Essential Steps
Blog Article
We've unearthed the article involving How to Troubleshoot and Repair an Electric Water Heater below on the internet and figured it made sense to discuss it with you over here.
Several contemporary houses utilize an electric water heater for their furnace, as a result of its comfort as well as ease of use. Nonetheless, similar to any other electric devices, troubles may arise with its use, all of a sudden. It can be truly aggravating to wake up to a cool shower rather than a hot one or having your bath with water that isn't warm enough and even also warm. Whatever the case might be, hot water heater issues can be quite stressful. Fortunately, we have actually made a listing of possible solutions to your water heater issues. There are a variety of variables that might trigger much of these troubles, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the trouble is, getting it fixed must not posture way too much of an issue if you comply with these steps:
Call A Professional:
If after replacing all defective components as well as resetting your temperature, the hot water heater still isn't functioning, you may need to get in touch with a professional plumber for a professional viewpoint. The problem with your heating unit could be that the cold and hot taps have been changed or it may be undersized for the amount of hot water required in your home. Whatever the case may be, a professional plumber would assist solve the issue.
Check Your Power Supply:
As standard as this might seem, it is very essential. Without ample power, your water heater will certainly not operate. So the first thing to do when your water instantly retires is to verify that it isn't a power issue. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, simply turn it off and on once again. Replace any kind of damaged or worn-out fuse. Test the home appliance with power after these changes to see if it's now working.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may require to examine the temperature setups on your upper thermostat. Make certain the breaker is turned off before doing anything. Open the access panel as well as press the red switch for temperature level reset over the thermostat. This need to aid warm the water. Turn the circuit breaker back on and also check if the trouble has been resolved.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that try checking out your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any of them is damaged, change that component and after that check whether the warm water is back on.
Conclusion
Hot water heater issues are not constantly major. A lot of them are due to small problems like a blown fuse or damaged burner. Replacing the defective parts should work. Nonetheless, if you are still incapable to address the problem, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our topic on What Would Cause My Electric Water Heater to Stop Working?. Thank you so much for taking a few minutes to read through our piece. Enjoyed our post? Please share it. Help another person find it. Thanks a lot for your time. Please come visit our blog back soon.
Top service? Dial now. Report this page